ASAKA ratchet tie down

The ratchet tie down is a device for tensioning the packing belt used by the goods in the packaging process of the goods. The traditional tensioner packing belt is fixed at both ends of the ratchet tie down , which makes the ratchet tie down it self too complex. And the packing belt is only fixed by a simple buckle, which is extremely easy to be detached and affects the packing efficiency.

This paper presents a ratchet tie down which can lock, fix and cut the packing belt at one end, which makes the structure of the baler more concise and easy to carry, and adopts the unique design of the card slot of the packing belt to effectively prevent the pulling off of the packing belt during the tensioning process.

art (2)

Structure composition: 

Composed of tensioning device main body and tighten the handle, the front end of the tensioning device main body is equipped with cutting device, cutting device and ratchet tie down device main body as fixed connection, the cutting device is also used to control cutting device to cut off the device handle, cutting device and cutting device for fixed connection hale tenndsion apparatus main body has a package in the middle of the belt groove,

Tensioning device main body in the middle of the inner chamber is equipped with tension in gear, packaged with fixed slot and taut gear for coaxial connection through bearing and tensioning device main body activity, taut gear is equipped with a pair of symmetrical handle fixed plate, the left and right sides of the handle fixed plate and the tensioning device consists of a fixed connection, the top of the handle fixed plate via bolts and tighten handle active connection,Tension controller and strain at the bottom of the gear meshing, tensioning device main body in the middle of the pack with a fixed groove on the right side of belt, also has brought fixed connection, and tensioning device subject to take her along with used for pressure packing belt grooved, pressure grooved and belt for active connection, pressure on one side of the grooved has used to grooved raise pressure grooved handle,The handle of the pressure belt groove and the pressure belt groove are fixedly connected. The bottom of the middle position of the ratchet tie down body and the bottom of the right end are provided with an anti-skid support plate, and the anti-skid support plate is fixedly connected with the main body of the ratchet tie down.

Further, the packing belt retaining groove consists of four fan-shaped blocks of the same size.

Further, the top end of the tensioning handle is provided with a non-slip sleeve.

Further, the material of the non-slip sleeve is rubber.

Advantages:

through the use of the patented structure design, the ratchet tie down structure is more simple and reasonable, more convenient operation, more convenient to carry.

And through the unique packing belt card slot design, effectively prevent the packing belt in the process of tension off the phenomenon.

With this device, the packaging efficiency is effectively improved, the mobile office is realized, the workload of the staff is greatly reduced, and the packaging effect is also significantly improved.

art (1)

Working mode:

This design can effectively prevent the overflow of the packing belt. The packing belt lining is used to pack the goods. The packing belt of the packaged goods is wound around the fixed groove of the packing belt, and the tensioning handle is manipulated.

Through the engagement of the tension handle and the tension gear, the fixed slot of the packing belt is driven to rotate synchronously, and the packing belt is tightened synchronously. When the tension requirements are met, the excess packing belt is placed at the cutting device, the handle of the cutting device is controlled to remove the excess packing belt, and the packing clamp is used to lock it, and the whole packing process is completed.

Note:

1. Use only the ratchet tie down that is not damaged, and the label can clearly indicate the ability.

2. Can not be overloaded.

3. Do not tie the ribbon.

4. When using, please try to keep the fabric away from sharp edges and corners to avoid abrasion or cutting.

5. Avoid twisting and twisting to arrange the ratchet tie down

6. Do not place objects on the ratchet tie down as this could cause injury.

7. Do not use the ratchet tie down as a load lifting adjustment.


Post time: Apr-15-2021