CD1 Wire Rope Electric Hoist

CD1 Wire Rope Electric Hoist

Model CD1 is a kind of electric rope hoist of light and mini type hoisting equipment. It can be used on single beam crane in I-shaped bridge type or straight/curved single rail I-beam bridge suspension for lifting heavy objects. The foot-mounted type of CD1 can be fixed on immovable under prop to lift vertically or with any angle rolling.
With its compact structure, legerity and convenient use/reparation, model CD1 is one of the daily used hoisting equipment in factories, mines, ports and warehouse.

Working environmental temperature: -20 degree to +40 degree
It is not used in places where the relative humidity is over 85% or where there is risk of fire and explosion or where there is much erosive gas.
Loading persisting rate: FC 25%.
Time of lifting in an hour: 120times/h

Structure and operating principle
The structure of Model CD1 includes lifting framework, travelling framework (not for stationery hoists) and electric apparatus control system.

Installation&Commissioning:
1. The trolley installation should be adjusted according to the width of the I-beam track with washers to ensure that the clearance between the wheel edge and the track is 4-5mm;
2. Installation, wiring and commissioning of the lifting weight limiter;
3. Installation and commissioning of the limiter (the limit is adjusted upward, the top of the hook and the drum shell are kept about 200mm space, when the limit is lower, the remaining total safety wire rope on the drum is kept at least 2 laps);
4. Check the refueling amount and oil quality of the reducer;
5. Inspection and adjustment of electronic brake;
6. Check and ensure the wiring inside the control box is firm, ensure the insulation resistance is normal, and ensure the cable wiring from the control box is correct;
7. Check and make sure the wedge and wedge sleeve are installed firmly;
8. Check and make sure the wire rope is normal, to avoid bending, corrosion, broken wire;
9. No-load test run and load test run.